- 产品中心
- 联系我们
-
联系人:业务部 谭先生
手机号:18820179977
电话:0769-8326 7494
www.inchr.en.alibaba.com
www.inchrmaterial.com
-
产品名称:ESD C 2580
订购热线:18820179977(微信同号)
产品说明:ESD C 2580 FR
Polycarbonate/ABS Alloy (PC/ABS)
ESD Protection
Electrically Conductive
Flame Retardant
PROPERTIES & AVERAGE VALUES OF INJECTION MOLDED SPECIMENS
PERMANENCEEnglish SI Metric ASTM
TESTSpecific Gravity 1.29 1.29 D 792 Molding Shrinkage 1/8 in (3.2 mm) section 0.0010 in/in 0.10 % D 955
MECHANICALImpact Strength, Izod notched 1/8 in (3.2 mm) section 1.0 ft-lbs/in 53 J/m D 256 unnotched 1/8 in (3.2 mm) section 6.0 ft-lbs/in 320 J/m D 4812 Tensile Strength 18000 psi 124 MPa D 638 Tensile Elongation 1.5 % 1.5 % D 638 Tensile Modulus 1.75 x 10^6 psi 12066 MPa D 638 Flexural Strength 25000 psi 172 MPa D 790 Flexural Modulus 1.50 x 10^6 psi 10342 MPa D 790
ELECTRICALVolume Resistivity < 1E0 ohm.cm < 1E0 ohm.cm D 257 Surface Resistivity < 1E4 ohm/sq < 1E4 ohm/sq D 257
ESD STM11.11
THERMALIgnition Resistance* Flammability** V-0 @ 1/16 in V-0 @ 1.5 mm D 3801 PROPERTY NOTES Data herein is typical and not to be construed as specifications.
Unless otherwise specified, all data listed is for natural or black colored materials. Pigments can affect properties.* This rating is not intended to reflect hazards of this or any other material under actual fire conditions. ** Values per RTP Company testing.
GENERAL PROCESSING FOR INJECTION MOLDINGEnglish SI Metric Injection Pressure 10000 - 15000 psi 69 - 103 MPa Melt Temperature 470 - 525 °F 243 - 274 °C Mold Temperature 125 - 200 °F 52 - 93 °C Drying 4 hrs @ 200 °F 4 hrs @ 93 °C Moisture Content 0.02 % 0.02 % Dew Point -20 °F -29 °C
PROCESSING NOTESDesiccant Type Dryer Required.
3 Jun 2005 JJH
This information is intended to be used only as a guideline for designers and processors of modified thermoplastics. Because design and processing is complex, a set solution will not solve all problems. Observation on a “trial and error” basis may be required to achieve desired results.
Data are obtained from specimens molded under carefully controlled conditions from representative samples of the compound described herein. Properties may be materially affected by molding techniques applied and by the size and shape of the item molded. No assurance can be implied that all molded articles will have the same properties as those listed.
上一个产品:ESD C 2800 B-55A下一个产品:ESD C 2500